chapter 5 of thesis

Awards Season
Big Stories
Pop Culture
Video Games
Celebrities

Where Can I Get Help Writing My Thesis Online?

You’ve spent years preparing for your master’s degree or PhD. You’ve read, studied and spent hours of time and energy writing papers. Now you’ve arrived at the culmination of all this effort: writing your thesis. There are plenty of compelling stories about the time and energy that students have spent drafting their dissertations and theses.

The good news is that you’re not alone. While you certainly don’t want to hire someone to write your thesis for you, which goes against most institution policies and puts your academic integrity at risk, you can get plenty of help with certain aspects of your thesis online. Whether you’re looking for a little guidance or extensive assistance, various services can make writing or editing your thesis go smoothly.

Dissertation Editor

One of the greatest challenges of writing your thesis can be juggling your family or job responsibilities with your studies. The time that writing takes can add another layer of obligation to your already-packed schedule. Dissertation Editor is a company whose founder is a PhD-educated writer and professor, and it promises to help you complete your thesis or dissertation on time and in compliance with your university’s rules and regulations.

Dissertation Editor’s primary function is to guide you along in the writing process and provide a helping hand in understanding everything you need to take care of. It places you with a writer who specializes in your area of study, and this individual can help you organize and analyze your research while making sure that your thesis fits your writing style and personality. This company also specializes in helping with any statistical analysis that you use in your thesis.

Thesis Helpers

If you’re concerned about using a service to help you write your thesis because you think it’ll be obvious that you hired help, don’t worry. Thesis Helpers puts its team of experienced writers to work for you to help you craft a thesis that finishes your degree on a high note. No matter what level of help you need, from narrowing down a topic to advanced editing and proofreading, they’re available to help.

The writers have advanced degrees in their areas of expertise, and one of the best things about Thesis Helpers is that it gives you ultimate say in the final product of your thesis. This company can help you with revisions and additional research, and you can rest assured that your thesis will meet anti-plagiarism standards.

Best Dissertation

Sometimes when you’re writing a thesis or dissertation, you can get stuck on one section or chapter. You may not need assistance writing the whole thing, but getting some help with the exact portion you’re struggling with can come in handy. That’s one of the strengths of using Best Dissertation . You don’t have to rely on it for help with your entire thesis if it’s not what you need.

Like most of the top thesis-assistance services, Best Dissertation employs writers with advanced degrees who specialize in various fields of study. What truly sets this company apart is the live support that it offers any time of the day or night. It claims to take the stress and strain out of writing your dissertation or thesis.

While some companies place a premium on helping you get your thesis written, others emphasize the editing and proofreading process. If you don’t need help with writing but need a hand with proofreading and editing, Scribbr is a good option for you. Its editors can help you get a grasp on the grammar and tone that are appropriate for academic writing.

Scribbr doesn’t just provide boilerplate feedback that you can find anywhere. It offers personalized feedback aimed at helping you become a better writer in the long run. You can even see examples of how its editors work by looking at the company’s website.

My Assignment Help

Writing a thesis has its own challenges that other academic writing simply doesn’t, which is why the team at My Assignment Help offers its particular brand of expertise. If you need assistance with a dissertation or thesis at the PhD or master’s level, its writers have the level of education and experience to help you write an expertly crafted and edited thesis.

My Assignment Help prides itself on hiring subject matter experts, meaning you can pair up with a helper who already has an advanced degree in your field. They understand the nuances of academic writing that are specific to your area of study, and they can provide advice on everything from making your abstract more unique to crafting a thought-provoking conclusion.

The Purpose of Chapter 5 Topic 2: Chapter 5

Writing Dissertation Chapter 5: The Biggest Mistake Students Make

Published by steve tippins on june 4, 2020 june 4, 2020.

Last Updated on: 29th August 2022, 08:29 am

Chapter 5 of your dissertation is different from all of the previous four chapters.

If you’re beginning to write Chapter 5 of your dissertation, you know that most of the writing you’ve done up until now was fairly formulaic. You’ve probably been following templates with strict requirements about what needs to be included in each section and subsection. Even in Chapter 5, many schools will give you a template. But don’t let that fool you.

Regardless of whether you receive a rubric for it, Chapter 5 of your dissertation is unique.

Your dissertation’s Chapter 5 is where you get to be more individualistic than in any other chapter and really “sing your song.” Why? It’s where you tell the reader what your results mean. Not just what they are, but what they mean. You tell them what they should take away from your study. You describe how your results can help others in the world or in the field.

The Most Common Mistake Students Make When Writing Chapter 5 of Their Dissertation

close-up shot of a woman writing notes with a cup of cofee

The biggest mistake students make when writing their dissertation’s Chapter 5 is not writing enough. In fact, students often submit an “implications” section that’s only a few paragraphs.

As a committee member , it’s hard to see someone who has spent a year on a research topic and written 100+ pages about it and then get to the implications in Chapter 5 and see two paragraphs. This begs the question, “You mean this is all you have to say?”

Don’t cheat yourself in Chapter 5. Really explain and tell the story of what your results mean.

This is where you get to bring out your intellectual curiosity and help others really understand what you did and why you did it, what it means, and why it’s important. Of course, you’ll need to do this all within the guidelines of what your university will allow you to do.

Normally Chapter 5 of a dissertation is about 15-20 pages. If it’s under ten pages, you’re really underselling your research. When you get to around 30-40 pages, your committee is going to wonder, “did all this come from your study?” or “couldn’t this have been said more succinctly?”

Tips for Writing Dissertation Chapter 5

woman with orange sunglasses typing on her laptop next to a big window

Reference the Literature. If you’re stumped for things to write, look at what you said in Chapter 2 and tell the reader what your results mean in relation to what the researchers you quoted in Chapter 2 were talking about.l How you have added knowledge to the field?

Consider Your Defense. When you do the defense of your final document, Chapter 5 is where you end up at the end of your presentation. This is the last thing you talk about before you get to questions, and it’s where you may be able to answer questions before they come up.

Address Your Problem and Purpose. Don’t forget to remind the reader what your problem statement and research questions were at the beginning of Chapter 5. Explain how your results apply to the problem and purpose.

Hack Your Dissertation

5-Day Mini Course: How to Finish Faster With Less Stress

Interested in more helpful tips about improving your dissertation experience? Join our 5-day mini course by email!

Back Everything Up. Also remember that even though it’s your chance to interpret and even express yourself, you still have to back everything up. Use quotes or data points from your results section and relate it to other research.

Use a Bird’s Eye View. This is where you can use graphics, charts, graphs, or other data that are much broader in scope than you might use elsewhere. In Chapter 4, for example, you’re going to use a graph that specifically relates to a statistical test you did. In Chapter 5, you might use one that’s broader in scope if it fits the flow of what you’re writing.

Tell a story. While other chapters might have been written in more of a compartmentalized style because of their formulaic nature, in Chapter 5 you’re really telling the story of your research. In line with that, the writing will need more of a flow.

Dissertation Chapter 5 Sample Template With Explanations

woman in all black clothes typing on her laptop

Introduction

In the introduction, tell the reader what they’re going to learn in Chapter 5. Reiterate the problem and purpose statements and your research questions and, if appropriate, reference the results from Chapter 4.

Implications

This is where you tell people here’s what the results of your study mean and why they are important. It also acts as a summary or “summing up” of the data. “These people said this,” or “this statistic was significant.” Make sure to support what you say with the research findings and avoid drawing conclusions that are beyond the scope of the study results.

Then discuss the real-world application of your findings. For example, “This is an approach that could be used by schools to help autistic children have better learning outcomes,” or “this is a technique that investors can use to predict valuable stock market returns.” Again, make sure to stay within the scope of your study.

Place your study in context. Describe how the results respond to the study problem, align with the purpose, demonstrate significance, and contribute to the existing literature described in Chapter 2.

Recommendations

The recommendations section is where you get to say, “and if you want to take this further, here are some suggestions for ways that this could be broadened or enhanced.” Here are some examples of what these suggestions could look like:

The conclusion of Chapter 5 is where you get to wrap up your story. “And so, boys and girls, this is what all this came down to.” Okay, you might not want to phrase it like that. But that’s essentially what you’re doing.

Don’t try to add new information in the conclusion. Remember, it’s like a speech: tell them what you’re going to tell them, tell them, then tell them what you told them.

Finishing Your Dissertation

Writing Chapter 5 and defending your dissertation is a big step towards getting your degree. Many students benefit from the support of a coach who is an experienced Dissertation Committee Chair at this point. A coach can conduct a mock defense with you in order to prepare you for the types of questions your committee will ask. Having answers to these questions can determine whether or not you pass your defense.

Check out my dissertation coaching services or contact me to book a free 30-minute consultation.

Book a Free Consultation

Book a Free Consultation with one of our expert coaches today.

Steve Tippins

Steve Tippins, PhD, has thrived in academia for over thirty years. He continues to love teaching in addition to coaching recent PhD graduates as well as students writing their dissertations. Learn more about his dissertation coaching and career coaching services. Book a Free Consultation with Steve Tippins

Dissertation

What makes a good research question.

Creating a good research question is vital to successfully completing your dissertation. Here are some tips that will help you formulate a good research question. What Makes a Good Research Question? These are the three Read more…

concentrated grad student taking dissertation notes

Dissertation Structure

When it comes to writing a dissertation, one of the most fraught questions asked by graduate students is about dissertation structure. A dissertation is the lengthiest writing project that many graduate students ever undertake, and Read more…

professor consulting students in his office

Choosing a Dissertation Chair

Choosing your dissertation chair is one of the most important decisions that you’ll make in graduate school. Your dissertation chair will in many ways shape your experience as you undergo the most rigorous intellectual challenge Read more…

Please subscribe me to your newsletter.

Weekly hour-long meetings

Review of materials

Email support between meetings

Someone who’s on your side & dedicated to your success

Add to Cart

Main navigation

Chapter 5: Conclusion, Interpretation and Discussion

Introduction.

The following chapter concludes this report. A summary of the research is presented, and findings of the study are discussed and interpreted. The significance of this research in the immediate context of El Gallo and in the field of low-income housing is examined. Recommendations for further research end the chapter.

The scope of the following conclusions is limited to the context and historical characteristics of El Gallo. Thus, applied to other situations, these conclusions may yield incorrect assumptions. Still, these conclusions are relevant to the process of dwelling evolution in progressive development projects.

5.1 Summary of Research

This study observed the process of dwelling evolution in progressive development projects. The literature review was concentrated on the process of progressive development occurring in planned sponsored projects. It was found that, based on observations of the informal settlement process, progressive development under different contextual conditions was not questioned, and its benefits were taken for granted. Studies in the area were reduced to the period of improvement up to the time when the dwelling was physically consolidated. Longer term evaluation of progressive development projects were not found.

Research was undertaken on a 27-year-old progressive development project in Venezuela. The intention was to observe the process of dwelling evolution and the kind of housing that was being produced under progressive urban development projects on a long-term basis. The case study showed dwellings built with different initial levels of user-participation. Dwelling evolution was observed in a survey sample using parameters relevant to the case study (i.e., area increase, dwelling spatial growth and plot occupation, and changes in the functional structure).

Survey dwellings followed identifiable patterns of evolution in size, spatial structure and use-layout. Patterns were affected by aspects of the surrounding context and by aspects inherent to characteristics of the initial dwelling. Consequently, different dwelling groups showed different processes of progressive development.

5.2 Discussion and Interpretation of Findings.

As progressive developments, dwellings at El Gallo were able to adopt new and diverse roles along their whole process of evolution. In this section, relevant issues of the process of dwelling evolution observed at El Gallo are discussed. The first concerns the role of the non-permanent structure in the context of El Gallo as a sponsored progressive development project. The second comments on the process of dwelling evolution that followed the construction of the permanent structure.

In principle, non-permanent structures at El Gallo were similar to ranchos built in informal settlements. Ranchos at El Gallo served as primary shelters while more basic household priorities were met (i.e., services and infrastructure were provided, sources of income were found and generated, and even a favourable social environment was developed among neighbours). However, the majority of tin shacks were neither considerably increased nor upgraded with better materials even when they were used for long periods of time. This fact, together with the sudden change in the pace of development caused by the construction of a very complete permanent dwelling and subsequent removal of the rancho, had no connection with the gradual process of shack replacement observed in invasion settlements of Ciudad Guayana during this study (Portela, M. 1992). Neither did this process have a relationship with the system of "piecemeal construction" described by several housing researchers as characteristic of low-income dwellers.

The shanties were... housing in process of improvement. In particular the piecemeal system of building afforded great advantages to those who, like most of the poor in developing societies, have great variations in income from month to month (Peattie L. 1982:132).

Under El Gallo conditions of land security, ranchos did not show consolidation, and revealed their transient character because they were eventually substituted by permanent structures. The non-permanent structure revealed the primary household's aspiration for a minimum satisfactory habitable area. However, besides basic shelter during the initial stage, ranchos served to the purposes of capital accumulation that eventually allowed households to buy a basic unit according to official standards, or building a bigger, more complete first permanent structure. The size of ranchos reflected households' aspirations for the permanent dwelling, that is,smaller ranchos were substituted by basic units of the housing programs. Instead larger ranchos were substituted by large self-produced dwellings.

It is difficult to ascertain why ranchos were removed when they could have been kept as part of the dwelling, as in fact did a minority of households (2 cases). Is a fact that the temporary materials of ranchos contributed to their deterioration that ended with the total removal of the rancho. However, an idea that may have contributed to the demolition of the rancho was the household's adoption of the planner's belief that ranchos were a bad but necessary step on the way to obtaining permanent housing. Thus, once the permanent dwelling was built, the price households paid to gain credibility (i.e., that this stage was reached) was the demolition of the rancho itself. This interpretation can be specially true for Ciudad Guayana, where dwellings of certain quality such as those of El Gallo were seen as "casas" or houses. Instead, structures of similar quality in the hills of cities such as Caracas were still considered ranchos. In the long run, informal settlements obtained the largest benefits from this process because they gained far more official tolerance and social credibility (i.e., that shacks were actually temporary means of residence towards good-quality housing).

Those who lived in smaller ranchos improved their spatial conditions by moving to the small basic dwellings. Those who occupied bigger ranchos built bigger dwellings by themselves. Still, some households built their dwellings without going through the rancho stage. Self-produced dwellings followed the formal models either to gain the government's credibility of user commitment to build "good" government-like housing, or because households believed so. Imitation of the formal models, however, varied according to the builder's interpretation. For instance, the pattern of the detached dwelling was adopted, but often one of the side yards was reduced to a physical separation between the dwelling and the plot separation wall. More effective interpretations involved enlarging the front porch or using the central circulation axis to allow easy extension in the future.

The building approach of the permanent structure influenced the process of evolution that followed. Basic units built by the housing agencies had a compact, complete layout with higher standards of construction; however, aspects of the design, such as internal dimensions, were inadequate for household criteria, and the layout was not well adapted. Dwellings built according to provided plans and specificationshad similar problems, but households enlarged spaces and modified layouts when they were building the units. The level of construction standards was also reduced since the lateral façades of some dwellings were unfinished. Dwellings built totally by self-help means were the largest permanent structures. Aspects of the design of the first permanent structure allowed easy extension of the dwelling towards open areas of the plot. More user participation was reflected in straight-forward processes of evolution without internal modifications, and fewer stages to reach the current houseform.

5.3 Significance of the Study

While this study acknowledges again the effectiveness of progressive development in the housing system, it shows how dwelling evolution in progressive development projects can have different characteristics produced by internal and external interventions. Usually, projects are designed and launched to reproduce certain desirable outcomes and meet specific expectations. However, conditions prevailing in these projects and sometimes strategies that are introduced to "improve," "speed up" or make more "efficient" the process of evolution can affect the outcome in many different ways. This study showed how contextual characteristics of El Gallo, as well as the design and level of user participation in the initial permanent dwelling, affected successive stages of progressive development. However, it is important to recognize that are other issues beyond the spatial aspects that are intrinsically related with the evolution of the dwellings and that were not included within the scope of these particular research (i.e., household's changes in income, size, and age or gender structure).

The findings at El Gallo add modestly to the body of knowledge of literature on progressive development. Progressive Urban Development Units, UMUPs , have been the main housing strategy in Ciudad Guayana these last years, and they are likely to keep being used. Simple facts such as knowing the characteristics of the additions and modifications that households make to their dwellings over time can be the basis for more assertive actions supporting or enforcing progressive development activities. Understanding the process of dwelling evolution in low-income developments would be an effective way to help the process that, in the case of Ciudad Guayana, zonings and bylaws have been unable to regulate.

5.4 Recommendations for Further Research

Long term assessments are particularly constrained by the availability and reliability of recorded data. The frequency, and often the methodology, in which censuses and surveys are made do not always suit the purposes of this kind of research. Household interviews are very important, but they may become troubled by informant's limited memories and the continuity of the household in the dwelling. Aerial documentation, if available, represents one of the most reliable sources to observe physical change. Nevertheless, a careful and detailed process of observation of aerial data becomes very time consuming. For similar studies, a first phase in which the housing diversity is identified in the aerial data according to the selected criteria, would allow to reduce the number of detailed survey samples needed, thus considerably reducing the time of data collection.

In the context of Ciudad Guayana, further studies of the non-permanent dwelling in recent UMUPs would reveal new insights into the function of these structures in progressive development projects. This would be essential especially if any kind of initial aid is to be provided. On the other hand, following the growth of progressive developments is necessary if services and infrastructure are, as they are now, the responsibility of the local government. Identifying the producers of physical evolution -- i.e., the drivers and catalysts of change -- would be an important step for further research. An interesting step within this trend could be to ascertain the extent in which other household processes -- family growth, income increase and economic stability, household aging, changes in the household composition (single- to multi- family), etc., affect the process of dwelling evolution.

In the context of low-income housing, the process of progressive development needs further understanding. As in Ciudad Guayana, progressive development is likely to be the main housing strategy for other developing countries in the near future. Local authorities would do well to follow the evolution of settlements and to identify real household needs, and the consequences of public and/or private interventions in low-income settlements. Perhaps the most important learning of this study is that the experience of El Gallo acknowledges again the dynamic participation of the low-income households under different conditions, and still leaves wide room for a positive participation for the many other actors in the evolving urban entity.

. Notes for Chapter V

1 Dodge reports that some settlers of Ciudad Guayana kept the rancho and rented it to poorer families (Dodge,C. 1968:220). This attitude has been more common in other progressive development projects. The Dandora site and services also encouraged the construction of temporary shacks while the permanent dwelling was built. However, non-permanent structures remained to be rented or used as storage areas even after the permanent dwelling was built (McCarney, P.L. 1987:90).

Department and University Information

Minimum cost housing group.

Improved Surface Drainage of Pavements: Final Report (1998)

Chapter: chapter 5 summary, findings, and recommendations.

Below is the uncorrected machine-read text of this chapter, intended to provide our own search engines and external engines with highly rich, chapter-representative searchable text of each book. Because it is UNCORRECTED material, please consider the following text as a useful but insufficient proxy for the authoritative book pages.

CHAPIER 5 SI~MARY, FINDINGS, AND RECOMMENDATIONS SUGARY The primary objective of this research was to identify unproved methods for draining rainwater from the surface of multi-lane pavements and to develop guidelines for their use. The guidelines, along with details on the rationale for their development, are presented in a separate document' "Proposed Design Guidelines for Improving Pavement Surface Drainage" (2J. The guidelines support an interactive computer program, PAVDRN, that can be used by practicing engineers In the process of designing new pavements or rehabilitating old pavements' is outlined In figure 39. The intended audience for the guidelines is practicing highway design engineers that work for transportation agencies or consulting firms. Improved pavement surface drainage is needed for two reasons: (~) to minimize splash and spray and (2) to control the tendency for hydroplaning. Both issues are primary safety concerns. At the request of the advisory panel for the project, the main focus of this study was on ~mprov~g surface drainage to mammae the tendency for hydroplaning. In terms of reducing the tendency for hydroplaTuT g, the needed level of drainage is defined in terms of the thickness of the film of water on the pavement. Therefore, the guidelines were developed within the context of reducing the thickness of the water film on pavement surfaces to the extent that hydroplaning is unlikely at highway design speeds. Since hydroplaning is ~7

DESIGN CRITERIA Pavement Geometry Number of lanes Section type - Tangent - Horizontal curve - Transition - Vertical crest curve - Vertical sag curve Enviromnental oramaters Rainfall intensity ~ Temperature Pavement Tvpe Dense-graded asphalt Porous asphalt Portland cement concrete ~ Grooved Portland cement concrete Desion Soeed Allowable speed for onset of hydroplaning Recommend Desion Changes Alter geometry Alter pavement surface Add appurtenances Groove (Portland cement concrete) CALCULATIONS Lenoth of flow path Calculate on basis of pavement geometry IT Hydraulic Analvses . No? Water film thickness Equation No. 10 Equation No.'s. 16-19 1 Hvdroolanino Analvsis Hydroplaning speed Equation No.'s 21-24 Rainfall Intensity Equation No. 25 -A I / Meet Design ~ \ Cntena? / \<es? Accent Desinn | Figure 39. Flow diagram representing PAVI)RN design process In "Proposed Guidelines for Improving Pavement Surface DrmT~age" (2). 118

controlled primarily by the thickness of the water film on the pavement surface, the design guidelines focus on the prediction and control of ache depth of water flowing across the pavement surface as a result of rainfall, often referred to as sheet flow. Water film thickness on highway pavements can be controlled In three fundamental ways, by: I. Minimizing the length of the longest flow path of the water over We pavement and thereby the distance over which the flow can develop; 2. Increasing the texture of the pavement surface; and 3. Removing water from the pavement's surface. In the process of using PAVDRN to implement the design guidelines, the designer is guided to (~) minimize the longest drainage path length of the section under design by altering the pavement geometry and (2) reduce the resultant water film thickness that will develop along that drainage path length by increasing the mean texture depth, choosing a surface that maximizes texture, or using permeable pavements, grooving, and appurtenances to remove water from the surface. Through the course of a typical design project, four key areas need to be considered in order to analyze and eventually reduce the potential for hydroplaning. These areas are: ~9

I. Environmental conditions: 2. Geometry of the roadway surface; 3. Pavement surface (texture) properties; and 4. Appurtenances. Each of these areas and their influence on the resulting hydroplaning speed of the designed section are discussed In detail In the guidelines (21. The environmental conditions considered are rainfall ~ntensibr and water temperature, which determines the kinematic viscosity of the water. The designer has no real control over these environmental factors but needs to select appropriate values when analyzing the effect of flow over the pavement surface and hydroplaning potential. Five section types, one for each of the basic geometric configurations used In highway design, are examined. These section are: 1. TaIlgent; 2. Superelevated curve; 3. Transition; 4. Vertical crest curve; and 5. Vertical sag curve. 120

Pavement properties that affect the water fihn thickness mclude surface characteristics, such as mean texture depth and grooving of Portland cement concrete surfaces, are considered In the process of applying PAVDRN. Porous asphalt pavement surfaces can also reduce He water film thickness and thereby contribute to the reduction of hydroplaning tendency and their presence can also be accounted for when using PAVDRN. Finally, PAVDRN also allows the design engineer to consider the effect of drainage appurtenances, such as slotted drain inlets. A complete description of the various elements that are considered In the PAVDRN program is illustrated In figure 40. A more complete description of the design process, the parameters used in the design process, and typical values for the parameters is presented In the "Proposed Design Guidelines for Improving Pavement Surface Drainage" (2) alla in Appendix A. fIN1)INGS The following findings are based on the research accomplished during the project, a survey of the literature, and a state-of-the-art survey of current practice. I. Model. The one~unensional mode} is adequate as a design tool. The simplicity and stability of the one~imensional mode} offsets any increased accuracy afforded by a two-d~mensional model. The one~mensional model as a predictor of water fiDn thickness and How path length was verified by using data from a previous study (11). 121

No. of Planes Length of Plane Grade Step Increment Wdth of Plane Cross Slope Section T,rne 1) Tangent 2) Honzontal Curare 3) Transition 4) Vertical Crest 5) Vertical Sag U=tS 1)U.S. 2) S. I. Rainfall Intenstity ~ , \ |Kinematic Viscosity |Design Speed Note: PC = Point of Curvature PI. = Point of Tangency PCC = Portland cement concrete WAC = Dense graded asphalt concrete 0GAC = 0pcn~raded asphalt concrete where OGAC includes all types of intentally draining asphalt surfaces GPCC = Grooved Ponland cement concrete Taneent Pavement Type Mean Texture Depth 1) PCC 2) DGAC 3) OGAC 4) GPCC Horizontal Cun~c Grade Cross Slope Radius of Cunran~re Wdth Pavement Type _ 2) DGAC 3) OGAC 4) GPCC Mean Texture Depth Step Increment _ Transition Length of Plane Super Elevation Tangent Cross Slope Tangent Grade width of Curve Transition Width Pavement Type_ 1) PCC 3) OGAC 4) GPCC Mean Texture Depth Step Increment Horizontal Length Cross slope width PC Grade PI' Grade Elevation: Pr-PC Vertical Crest Flow Direction Step Increment Pavement Type 1) PC Side I 2) PI. Side | 1)PCC 2) DGAC 3) OGAC 4) GPCC Mean Tex~rc Depth _ _ ~ Figure 40. Factors considered in PAVDRN program. 122 ~1 r - . , Vertical Sad | Horizontal Length | Cross slope Wldth PC Grade PI Grade Elevation: PIE Flow Direction Step Increment / Stored :_ ~ cats ~ 1) PC Side | 2) PI Side | . Pavement Typed 1) PCC 3) OGAC 14) GPCC Mean Texture Depth I I

~ Stored data V ~ 3 L IN1T For use with a second nut using data from the first run.) , 1 EPRINT (Echos input to output ) 1 CONVERT (Converts units to and from SI and English.) ~ , ADVP (Advances Page of output.) KINW (Calculates Minning's n, Water Film Thickness (WEIR), and Hydroplaning Speed UPS).) , EDGE (Determines if flow has reached the edge of the pavement.) out roar Figure 40. Factors considered in PAVDRN program (continued). 123

2. Occurrence of Hydropl~r g. In general, based on the PAVDRN mode! and the assumptions inherent in its development, hydroplaning can be expected at speeds below roadway design speeds if the length of the flow path exceeds two lane widths. 3. Water Film Thickness. Hydroplaning is initiated primarily by the depth of the water film thickness. Therefore, the primary design objective when controlling hydroplaning must be to limit the depth of the water film. 4. Reducing Water Film Thickness. There are no simple means for controlling water John thickness, but a number of methods can effectively reduce water film thickness and consequently hydroplaning potential. These include: Optimizing pavement geometry, especially cross-slope. Providing some means of additional drainage, such as use of grooved surfaces (PCC) or porous mixtures (HMA). Including slotted drains within the roadway. 5. Tests Needed for Design. The design guidelines require an estimate of the surface texture (MTD) and the coefficient of permeability Porous asphalt only). The sand patch is an acceptable test method for measuring surface texture, except for the more open (20-percent air voids) porous asphalt mixes. In these cases, an estimate of the surface texture, based on tabulated data, is sufficient. As an alternative, 124

sand patch measurements can be made on cast replicas of the surface. For the open mixes, the glass beads flow into the voids within the mixture, giving an inaccurate measure of surface texture. Based on the measurements obtained In the laboratory, the coefficient of permeability for the open-graded asphalt concrete does not exhibit a wide range of values, and values of k may be selected for design purposes from tabulated design data (k versus air voids). Given the uncertainty of this property resulting from compaction under traffic and clogging from contaminants and anti-skid material, a direct measurement (e.g., drainage lag permeameter) of k is not warranted. Based on the previous discussion, no new test procedures are needed to adopt the design guidelines developed during this project. 6. Grooving. Grooving of PCC pavements provides a reservoir for surface water and can facilitate the removal of water if the grooves are placed parallel to the flow oath. Parallel orientation is generally not practical because the flow on highway pavements is typically not transverse to the pavement. Thus, the primary contribution offered by grooving is to provide a surface reservoir unless the grooves comlect with drainage at the edge of the pavement. Once the grooves are filled with water, the tops of the grooves are the datum for the Why and do not contribute to the reduction in the hydroplaning potential. 125

7. Porous Pavements. These mixtures can enhance the water removal and Hereby reduce water film tHch~ess. They merit more consideration by highway agencies In the United States, but they are not a panacea for eliminating hydroplaning. As with grooved PCC pavements, the internal voids do not contribute to the reduction of hydroplaning; based on the field tests done In this study. hv~ronImiina can be if, , , ~ expected on these mixtures given sufficient water fiLn thickness. Other than their ability to conduct water through internal flow, the large MTD offered by porous asphalt is the main contribution offered by the mixtures to the reduction of hydroplaning potential. The high-void ~ > 20 percent), modified binder mixes used In Europe merit further evaluation in the United States. They should be used In areas where damage from freezing water and the problems of black ice are not likely. 8. Slotted Drains. These fixtures, when installed between travel lanes, offer perhaps the most effective means of controlling water film thickness from a hydraulics standpoint. They have not been used extensively In the traveled lanes and questions remain unanswered with respect to their installation (especially in rehabilitation situations) and maintenance. The ability to support traffic loads and still maintain surface smoothness has not been demonstrated and they may be susceptible to clogging from roadway debris, ice, or snow. 126

RECOMMENDATIONS AND CONCLUSIONS The following recommendations are offered based on the work accomplished during this project and on the conclusions given previously: I. Implementation. The PAVDRN program and associated guidelines need to be field tested and revised as needed. The program and the guidelines are sufficiently complete so that they can be used in a design office. Some of the parameters and algorithms will I~ely need to be modified as experience is gained with the program. 2. Database of Material Properties. A database of material properties should be gathered to supplement the information contained in PAVDRN. This information should Include typical values for the permeability of porous asphalt and topical values for the surface texture (MTD) for different pavement surfaces to include toned Portland cement concrete surfaces. A series of photographs of typical pavement sections and their associated texture depths should be considered as an addition to the design guide (21. 3. Pavement Geometry. The AASHTO design guidelines (~) should be re-evaluated In terms of current design criteria to determine if they can be modified to enhance drainage without adversely affecting vehicle handling or safety. ~27

4. Use of appurtenances. Slotted drams should be evaluated In the field to determine if they are practical when Installed In the traveled way. Manufacturers should reconsider the design of slotted drains and their Installation recommendations currently In force to maximize them for use In multi-lane pavements and to determine if slotted drains are suitable for installations In the traveled right of way. 5. Porous Asphalt Mixtures. More use should be made of these mixtures, especially the modified high a~r-void mixtures as used In France. Field trials should be conducted to monitor HPS and the long-term effectiveness of these mixtures and to validate the MPS and WDT predicted by PAVDRN. 6. Two-D~mensional Model. Further work should be done with two~mensional models to determine if they improve accuracy of PAVDRN and to determine if they are practical from a computational standpoint. ADDITIONAL STUDIES On the basis of the work done during this study, a number of additional items warrant furler study. These Include: 1. Full-scale skid resistance studies to validate PAVDRN in general and the relationship between water film thickness and hydroplaning potential in particular are needed in light of the unexpectedly low hvdronlanin~ speeds predicted during 128 , . ~. , ~

this study. The effect of water infiltration into pavement cracks and loss of water by splash and spray need to be accounted for In the prediction of water fihn Sickness. Surface Irregularities, especially rutting, need to be considered in the prediction models. 2. Field trials are needed to confirm the effectiveness of alternative asphalt and Portland cement concrete surfaces. These include porous Portland cement concrete surfaces, porous asphalt concrete, and various asphalt m~cro-surfaces. 3. The permeability of porous surface mixtures needs to be confirmed with samples removed from the field, and the practicality of a simplified method for measuring in-situ permeability must be investigated and compared to alternative measurements, such as the outflow meter. 4. For measuring pavement texture, alternatives to the sand patch method should be investigated, especially for use with porous asphalt mixtures. 129

THIS PAGE INTENTIONALLY LEFT BLANK

Welcome to OpenBook!

You're looking at OpenBook, NAP.edu's online reading room since 1999. Based on feedback from you, our users, we've made some improvements that make it easier than ever to read thousands of publications on our website.

Do you want to take a quick tour of the OpenBook's features?

Show this book's table of contents , where you can jump to any chapter by name.

...or use these buttons to go back to the previous chapter or skip to the next one.

Jump up to the previous page or down to the next one. Also, you can type in a page number and press Enter to go directly to that page in the book.

To search the entire text of this book, type in your search term here and press Enter .

Share a link to this book page on your preferred social network or via email.

Ready to take your reading offline? Click here to buy this book in print or download it as a free PDF, if available.

Get Email Updates

Do you enjoy reading reports from the Academies online for free ? Sign up for email notifications and we'll let you know about new publications in your areas of interest when they're released.

IMAGES

Chapter 3 Methodology Example In Research
Thesis Chapter 1 To 5 Pdf
Sample Thesis Chapter 1 To 5 Pdf
Thesis Chapter 1 to 5
Thesis Chapter 1 to 5
THESIS CHAPTER'S TITLES

VIDEO

🌷💌 August Study DiariesㅣPhD Vlogㅣproductivityㅣplant updates
Chapter 4
GO19_AC_CH09_GRADER_9G_HW
Access 2A 2B Simulation Exam
Main Parts of Thesis/Research Writing
WRIT3307 Thesis Statements & Topic Sentences

COMMENTS

What Are Some Examples of Good Thesis Sentences?
Examples of a good thesis sentence includes a summary of the writer’s arguments about the subject of the written piece. A good thesis sentence answers a question that the body of the paper answers and explains in greater detail.
Where Can I Get Help Writing My Thesis Online?
You’ve spent years preparing for your master’s degree or PhD. You’ve read, studied and spent hours of time and energy writing papers. Now you’ve arrived at the culmination of all this effort: writing your thesis.
What Is a Good Thesis Statement?
A good thesis statement is a single sentence contained in the introduction of a paper that provides the reader with some idea of what the writer is trying to convey in the body of the paper. The thesis statement is a condensed summary of th...
The Purpose of Chapter 5
Understand the components of Chapter 5 · Write the introduction to include the problem, purpose, research questions and brief description of the methodology.
Writing Dissertation Chapter 5: The Biggest Mistake Students Make
Dissertation Chapter 5 Sample Template With Explanations · Introduction · Implications · Recommendations · Conclusion.
Chapter 5: Conclusion, Interpretation and Discussion
Introduction The following chapter concludes this report. A summary of the research is presented, and findings of the study are discussed and interpreted.
Applied Research Workshop Writing Chapter 5: Discussion
the chapter. • To discuss ideas related to the presentation, interpretation, and implications of dissertation findings. • To present an outline of Chapter 5
THESIS WRITING: WHAT TO WRITE IN CHAPTER 5
Your summary may include the following: (1) objectives of the study; (2) statement of the problem; (3) respondents; (4) sampling procedures; (5)
Chapter 5 Summary, Findings, and Recommendations
Read chapter Chapter 5 Summary, Findings, and Recommendations: Improved Surface Drainage of Pavements: Final Report...
Chapter Five: Dissertation Conclusion
This chapter aims to remind your reader of your findings from the previous chapters, summarize your interpretations, and illustrate how your research will
How to Write Chapter 5 Dissertation Guidelines
In this video, you will be able to learn:-❑ Understand the components of Chapter 5.❑ Write the introduction to include the problem
EASY WAY OF WRITING CHAPTER 5, SUMMARY OF FINDINGS
EASY WAY OF WRITING CHAPTER 5, SUMMARY OF FINDINGS ... Dissertation Introduction Or Thesis Introduction Chapter: 7 Steps + Loads Of Examples.
How to Write Chapter 5 Discussion Section
Hi, I'm Dr. Lacy, your dissertation life coach, here to help you finish your dissertation, graduate, and become DOCTOR in 12 months or less!
Dissertation Chapter 5 Annotated Sample.pdf
CHAPTER V: DISCUSSION. The purpose of this qualitative grounded theory study was to identify what motivates women to stay in or return to STEM professions